• Push the up arrow button to scroll up-
ward through the main menus (Speed-
ometer, Vehicle Info, Driver Assist, Fuel
Economy, Trip, Audio, Stored Messages,
Stop/Start and Screen Set Up).
• Push the down arrow button to scroll
downward through the main menu and
submenus.
• Push the right arrow button to access the
information screens or submenu screens
of a main menu item.
• Push the back/left arrow button to ac-
cess the information screens or sub-
menu screens of a main menu item.
• Push the OK button to access/select the
information screens or submenu screens of a main menu item. Push and hold the OK
button for two seconds to reset displayed/selected features that can be reset.
Compass Calibration
This compass is self-calibrating, which eliminates the need to set the compass manually.
When the vehicle is new, the compass may appear erratic and the instrument cluster
display will display “CAL” until the compass is calibrated.
You may also calibrate the compass by completing one or more 360 degree turns (in an
area free from large metal or metallic objects) until the “CAL” message displayed in the
instrument cluster display turns off. The compass will now function normally.
PROGRAMMABLE FEATURES
Instrument Cluster Display Main Menu Selectable Items
The instrument cluster display can be used to view the following main menu items:
NOTE:
Depending on the vehicles options, feature settings may vary .
• Speedometer • Trip
• Vehicle Info • Audio
• Driver Assist • Stored Messages
• Fuel Economy • Screen Setup
• Speed Warning • Stop/Start
NOTE:
Refer to your Owner's Manual on www .dodge.com/en/owners/manuals for further informa-
tion.
Instrument Cluster Display Controls
ELECTRONICS
183
To Next Page
Loading...
