WARNING!
ALWAYS drive safely with your hands on the wheel.
You have full responsibility and assume all risks
related to the use of the Uconnect features and appli-
cations in this vehicle. Only use Uconnect when it is
safe to do so. Failure to do so may result in an acci-
dent involving serious injury or death.
Even though the system is designed for many lan-
guages and accents, the system may not always work
for some.
NOTE:
It is recommended that you do not store names in your
Favorites phonebook while the vehicle is in motion.
Number and name recognition rate is optimized when
the entries are not similar. You can say “O” (letter “O”)
for “0” (zero).
Even though international dialing for most number com-
binations is supported, some shortcut dialing number
combinations may not be supported.
Audio Performance
Audio quality is maximized under:
•
Low-To-Medium Blower Setting
•
Low-To-Medium Vehicle Speed
•
Low Road Noise
•
Smooth Road Surface
•
Fully Closed Windows
•
Dry Weather Conditions
•
Operation From The Driver's Seat
Performance such as audio clarity, echo, and loudness
to a large degree rely on the phone and network, and
not the Uconnect Phone.
Echo at the far end can sometimes be reduced by low-
ering the in-vehicle audio volume.
Phone Voice Commands
Making and answering hands-free phone calls is easy
with Uconnect. When the Phonebook button is illumi-
nated on your touchscreen, your system is ready. Check
UconnectPhone.com for mobile phone compatibility
and pairing instructions.
Push the Phone button
and wait for the beep to
say a command. Here are some examples:
•
“ Call John Smith”
•
“ Dial 123 456 7890”
•
“ Redial” (call previous outgoing phone number)
•
“ Call back” (call previously answered incoming
phone number)
Did You Know: When providing a Voice Command, push
the Phone button
and say “ Call”, then pronounce
the name exactly as it appears in your phonebook.
When a contact has multiple phone numbers, you can
say “ Call John Smith work”.
Voice Text Reply — If Equipped
Uconnect can announce incoming text messages. Push
the VR button
or Phone button and say:
1. “ Listen” to have the system read an incoming text
message. (Must have compatible mobile phone
paired to Uconnect system.)
2. “ Reply” after an incoming text message has been
read.
Listen to the Uconnect prompts. After the beep,
repeat one of the predefined messages and follow
the system prompts.
PRE-DEFINED VOICE TEXT REPLY RESPONSES
Yes. Stuck in traffic. See you later.
No.
Start without
me.
I’ll be late.
Okay. Where are you?
Iwillbe5<or
10, 15, 20, 25,
30, 45, 60>
minutes late.
Call me.
Are you there
yet?
I’ll call you later.
I need
directions.
Seeyouin5
<or 10, 15, 20,
25, 30, 45, 60>
minutes.
I’monmyway.
Can’t talk right
now.
I’m lost. Thanks.
NOTE:
Only use the numbering listed in the provided table.
Otherwise, the system will not transpose the message.
Did You Know: Your mobile phone must have the full
implementation of the Message Access Profile (MAP)
to take advantage of this feature. For details about
MAP, visit UconnectPhone.com.
Apple® iPhone® iOS 5 or later supports reading incom-
ing text messages only. For further information on how
to enable this feature on your Apple® iPhone®, refer to
your iPhone® “User Manual”.
Did You Know: Voice Text Reply is not compatible with
iPhone®, but if your vehicle is equipped with Siri® Eyes
Free, you can use your voice to send a text message.
Siri® Eyes Free — If Equipped
When used with your Apple® iPhone® connected to
your vehicle via Bluetooth®, Siri lets you use your voice
to send text messages, select media, place phone calls
and much more. Siri uses your natural language to
understand what you mean and responds back to con-
MULTIMEDIA 165
5
To Next Page
Loading...
