Dodge Durango 2024 - Page 78

WARNING!
Measurement of vehicle statistics with the Perfor-
mance Features is intended for off-highway or track
use only and should not be done on any public road-
ways. It is recommended that these features be used
in a controlled environment and within the limits of
the law. The capabilities of the vehicle as measured
by the performance pages must never be exploited in
a reckless or dangerous manner, which can jeopar-
dize the user’s safety or the safety of others. Only a
safe, attentive, and skillful driver can prevent
accidents.
The Performance Features include the following:
•
0-60 mph (0-100 km/h) Timer
○ Best
○ Last
○ Current
•
0-100 mph (0-160 km/h) Timer
○ Best
○ Last
○ Current
○ Reaction Time — If Selected
•
0-60ft Duration
○ Best
○ Last
○ Current
○ Reaction Time — If Selected
•
1/8 Mile (200 meters) Timer
○ Best
○ Last
○ Current
○ Reaction Time — If Selected
•
1/4 Mile (400 meters) Timer
○ Best
○ Last
○ Current
○ Reaction Time — If Selected
•
Braking Distance
○ Distance
○ From Speed
•
Current G-Forces
•
Peak G-Forces
•
Lap Timer
•
Lap History
○ Will list the last four laps with the best lap high-
lighted in green.
•
Top Speed
Driver Assist — If Equipped
Push and release the up or down arrow button
until the Driver Assist display icon/title is highlighted in
the instrument cluster display then use the left
or
right
arrow button to choose adaptive cruise con-
trol or LaneSense
page 105.
Fuel Economy
Push and release the up or down arrow button
until the Fuel Economy Menu icon/title is highlighted.
Push the left
or right arrow button to scroll the
submenus, one with current fuel economy display and
one without it.
•
Current MPG, L/100 km, or km/L
•
Average MPG, L/100 km, or km/L
•
Range to empty
•
Press the OK button to reset the average fuel
economy
NOTE:
The Range to empty feature is not able to be reset
through the instrument cluster display controls.
Trip
Push and release the up or down arrow button
until the Trip icon/title is highlighted in the instrument
cluster display, then push and release the left
or
right
arrow button to select Trip A or Trip B.
The Trip A and Trip B information will display the
following:
•
Distance
•
Average Fuel Economy
•
Elapsed Time
Hold the OK button to reset all the information.
Stop/Start – If Equipped
Push and release the up or down
arrow button on the steering wheel to
see the Stop/Start status in the driver inter-
active display
page 102.
Trailer Tow — If Equipped
Push and release the up or down arrow button
until the Trailer Tow Menu icon/title is highlighted in the
instrument cluster display. Push and release the left
or right arrow button to select Trailer Trip or
Trailer Brake.
Trailer Trip will display the following:
•
Distance
NOTE:
Press and hold the OK button to reset all the
information.
76 GETTING TO KNOW YOUR INSTRUMENT PANEL