modes.
4.3.5 The lock button disables training functions until unlocked. Use the lock
feature so dogs are not accidentally stimulated.
4.3.6 Sending stimulation
4.3.6.1 Select a dog from list or map view.
4.3.6.2 Select the stimulation level using the stimulation slider or
stimulation increase/decrease buttons.
4.3.6.3 Set the stimulation to Nick or Constant using the mode button.
4.3.6.4 Nick :Stimulation is sent when the stimulation button is pressed.
Stimulation will be sent as long as the button is pressed, up to 12
seconds, when set to Constant.
Constant, Tone :A tone will sound as long as the button is pressed,
up to 12 seconds.
※ The E-Collar tab is disabled when the Tracking Only mode is turned on in
the Function Settings menu.
To Next Page
Loading...
