4.6.2.1 Press the edit button to change device settings.
4.6.2.2 Name Change :Edit the device name.
4.6.2.3 ID :The GPS Collar ID can be changed. Change the ID when the
signal conflicts with another GPS Collar. The ID of devices that are
shared with you cannot be changed.
The first number in the ID is the Channel and the second number is
the order. Do not use the same ID for additional GPS Collars.
4.6.2.4 GPS Rate :The GPS update rate can be changed for each device with
the options for 2 seconds, 6 seconds, 10 seconds, 30 seconds and
120 seconds. The update rate of devices that are shared with you
cannot be changed.
4.6.2.5 Color :The color associated with the GPS Collar can be changed. The
device color is used in the icon, tracks, compass needle, and in the
device list views.
4.6.2.6 Hide or show a hidden device.
4.6.2.7 Rescue Mode :
Turning on Rescue Mode activates when the GPS Collar battery life
is at 25% or less. The device is placed in sleep mode and the
update rate is changed to 120 seconds. At 25% battery life, rescue
mode increases the standby time by 8 hours. The rescue mode
setting cannot be changed for devices that are shared with you.
4.6.2.8 Delete :Delete removes pairing between the GPS Collar and GPS
Connector, or removes from the app devices shared with you. To
add back the GPS Collar, the GPS Collar and GPS Connector will
have to be paired. Previously shared devices will need to be shared
again.
To Next Page
Loading...
