4.10.2.4 An invalid Geo-fence is displayed in red.
4.10.2.5 Once a valid Geo-fence is created, use the save button to the save
the Geo-fence to the map.
4.10.2.6 An invalid Geo-fence cannot be saved.
4.10.3 : Geo-fence points can be edited before saving.
4.10.3.1 Hold and drag the Geo-fence points to edit its location.
4.10.4 Geo-fence reset
4.10.4.1 Use the reset button to start over.
To Next Page
Loading...
