EasyManua.ls Logo

Dolmar PS-5105 - Carburetor Adjustment

Dolmar PS-5105
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
Instructions for periodic maintenance
To ensure long life, prevent damage and ensure the full functioning of the safety features the following maintenance must be per-
formed regularly. Guarantee claims can be recognized only if this work is performed regularly and properly. Failure to perform the
prescribed maintenance work can lead to accidents!
The user of the chain saw must not perform maintenance work which is not described in the instruction manual. All such work must
be carried out by a DOLMAR service centre.
General Chain saw Clean exterior, check for damage. In case of damage,
haverepairedbyaqualiedservicecentreimmediately
Saw chain Sharpen regulary, replace in good time 19-12
Chain brake Have inspected regularly at an authorized service centre
Guide bar Turn over to ensure even wear of bearing surfaces
Replace in good time 12, 21
Starter cable Check for damage. Replace if damaged. 25
Before each start Saw chain Inspect for damage and sharpness 19-20
Check chain tension 12
Guide bar Check for damage
Chain lubrication Functional check 15
Chain brake Functional check 17
Combination switch,
Safety locking button,
Throttle lever Functional check 17
Fuel/oil tank
cap Check for tightness
Every day Airlter Clean(severaltimesdailyifnecessary) 23
Guide bar Check for damage, clean oil intake bore 21
Guide bar support Clean, in particular the oil guide groove 15, 21
Idle speed Check (chain must not run) 18
Every week Fanhousing Cleantomaintaingoodcoolingairow. 9
Cylinderarea Cleantomaintaingoodcoolingairow. 26
Spark plug Check and replace if necessary 24
Mufer Checktightnessofmounting,Checkscrews 9,24
Spark arrester screen Clen and replace if necessary 24
Chain guide Check 11
Screwsandnuts Checktheirconditionandthattheyarermlysecured.
Every 3 months Suction head Replace 26
Fuel, oil tanks Clean
Annually Chain saw Check at an authorized service centre
Storage Chain saw Clean exterior, check for damage. In case of damage,
haverepairedbyaqualiedservicecentreimmediately
Guide bar/chain Demount, clean and oil slightly
Clean the guide groove of the guide bar 21
Fuel, oil tanks Empty and clean
Carburetor Run empty
Page

Other manuals for Dolmar PS-5105

Related product manuals