23
General work Chain saw Clean the outside and check for damage.
In case of any damage have it immediately repaired by a
service centre.
Sprocket Replace in time. 18
Chain brake Have it regularly checked by a service centre.
Before each start Chain Check for damage and sharpness. 16-17
Resharpen regularly, replace in time.
Check the chain tension. 11
Guide bar Check for damage.
Chain lubrication Functional check. 13-14
Chain brake Functional check. 14
ON/OFF switch,
Safety locking button
Throttle lever Functional check. 14
Fuel/oil tank
plug Check for tightness.
Every day Air fi lter Clean. 20
Guide bar Check for damage, clean oil intake bore. 13
Turn it over so that the bearing surfaces are equally worn.
Replace in time.
Guide bar support Clean, in particular the oil guide groove. 13
Idling speed Check (chain must not run). 15
Every week Fan housing Clean to ensure a perfect cooling air supply.
For this the fan housing must be demounted. 19
Carburetor interior and
cylinder ribs Clean, for this demount cover and protective cover.
Chain brake Clean the brake band (sawdust, oil) 17
Spark plug Check and replace if necessary. 20
Muffl er Tighten fastening screws. Clean spark arrester screen 18
Vibration damper Check. 21
Chain guide Check.
Screws and nuts Check their condition and that they are fi rmly secured.
Every 3 months Suction head Replace. 19
Fuel/Oil tank Clean.
Annually Chain saw Check at an authorized service centre
Storage Guide bar/chain Demount, clean and oil slightly.
Clean the guide groove of the guide bar. 17
Fuel/oil tank Empty and clean.
Oil pump Clean.
Carburetor Run empty.
Service, spare parts and guarantee
Maintenance and repair
The maintenance and repair work of modern engines as well as all safety related assemblies require qualifi ed technical training and
the availability of a workshop equipped with special tools and testing devices.
We therefore recommend you to consult a DOLMAR service centre for the performance of all work not described in this instruction
manual.
The DOLMAR service centres are provided with all the necessary equipment and skilled and experienced personnel to work out
correct customer solutions and to advise you in all matters accordingly.
Page
Instructions for periodic maintenance
To ensure long life, prevent damage and ensure the full functioning of the safety features the following maintenance must be per-
formed regularly. Guarantee claims can be recognized only if this work is performed regularly and properly. Failure to perform the
prescribed maintenance work can lead to accidents!
The user of the chain saw must not perform maintenance work which is not described in the instruction manual. All such work must
be carried out by a DOLMAR service centre.
To Next Page
Loading...
