Dolmar PS-9010 - Technical Data; Specifications; Component Identification

9
13
14
15
17
18
19
8
7
6
5
4
11
10
9
3
16
20
12
24
22
1
2
23
21
Denomination of components
1 Handle
2 Choke
3 Cover for air fi lter/spark plug
4 Switch for use in winter
5 Tubular handle
6 Muffl er
7 Fastening nuts
8 Spike bar
9 Chain catcher
10 Adjusting screw for oil pump (bottom side)
11 Sprocket guard
12 Identifi cation plate
13 Hand guard
14 Guide bar
15 Chain
16 Hand guard
17 Starter grip
18 Adjusting screws "H-S-L" for carburetor
19 ON/OFF switch
20 Safety locking button
21 Throttle lever
22 Fuel tank cap
23 Fan housing with starting assembly
24 Oil tank cap
Technical data
PS-9010
Identifi cation plate (12)
Indicate when ordering spare parts
PS-9010
2009 123456
DOLMAR GmbH, 22045 Hamburg, Germany
024.100.001 Typ: 024
Serial number
Year of manufacture
Stroke volume cm
3
90
Bore mm 52
Stroke mm 42
Max. power at speed kW / RPM 4.9 / 9,500
Max. torque at speed Nm / RPM 5.8 / 6,500
Limit speed RPM 13,500
Idling speed RPM 2,200
Coupling speed RPM 3,600
Sound pressure level L
pA, eq
per ISO 22868
1) 3) 4)
dB (A) 103 / K
pA
= 2,5
Sound power level L
WA, eq
per ISO 22868
1) 4)
dB (A) 110 / K
WA
= 2,5
Vibration acceleration a
hv, eq
per ISO 22867
1) 4)
- Tubular handle m/s
2
7.0 / K=2
- Rear handle m/s
2
6.2 / K=2
Carburetor (diaphragm carburetor) Type TILLOTSON HS-295A
Ignition system Type electronic
Spark plug Type NGK BPMR 7A
Electrode gap mm 0.5 - 0.8
or spark plug Type BOSCH WSR 6F
Fuel consumption at max. load per ISO 7293 kg/h 2.3
Specifi c consumption at max. load per ISO 7293 g/kWh 480
Fuel tank capacity l 1.0
Chain oil tank capacity I 0.4
Mixture ratio (fuel/two-stroke oil)
- when using DOLMAR oil 50:1 / 100:1 (HP-100)
- when using Aspen Alkylat (two-stroke fuel) 50:1 (2%)
- when using other oils 50:1 (quality grade: JASO FC or ISO EGD)
Chain brake engages manually or in case of kickback
Chain speed
2)
m/s 21.2
Sprocket pitch inch 3/8
Number of teeth Z 7
Chain type
(see the Extract from the spare-parts list)
Pitch / Driving element strength inch 3/8 / .058
Guide bar, length of a cut cm 50 / 60 / 74
Guide-bar type
(see the Extract from the spare-parts list)
Weight (fuel tank empty, without chain and guide bar) kg 8.2
1)
Figures derived in equal part from idle and full-load operation.
2)
At max. power.
3)
At the workplace.
4)
Uncertainty (K=).