DOM ENiQ AccessManager - Page 52

ENiQ® Wall Readers & Terminals
_____________________________________________________________________________________
52
The ENiQ® Module Readers of the variants:
- RELINO
- VOX-IO-Easy
- VOX-IO-Touch
have three separate LEDs in the colours green, yellow and red.
The green LED signals whether a transponder is authorised.
The yellow LED is the status LED.
It flashes if the ENiQ® Module Reader does not have any contact
to the ENiQ AccessManager® controller.
The red LED signals that a transponder is authorised.
The ENiQ® Module Readers of the variants:
- Baudisch
- Behnke
- ELCOM
- RITTO ACERO
- RITTO PORTIER
- Siedle
have two separate LEDs.
The left-hand LED is a multi-colour LED that can light up green
and yellow. The right-hand LED is a red LED.
If the reader does not have any contact to the ENiQ
AccessManager® controller, it flashes with the left-hand LED.
In normal mode, authorised access is shown by the left-hand LED
(green) and a non-authorised transponder by the right-hand LED
(red).