Dometic FreshWell3000 Before initial use
19
7 Before initial use
Inspection before starting up
Before you switch on the under-bench air conditioner, observe the following:
➤ Check whether the supply voltage and frequency correspond to the
values specified in the technical data, see page 33.
➤ Ensure both the air intake opening and the air nozzles are free. All venti-
lation grilles must always be kept free to ensure that the under-bench air
conditioner is able to operate at maximum capacity.
!
Check remote control and insert batteries
➤ Insert the provided batteries in the remote control battery compartment,
see chapter “Replacing the remote control batteries” on page 26.
➤ Check that the four Dip switches (fig. 4 1, page 4) are in the correct
position.
➤ If you changed the position of the Dip switches:
Acknowledge the new setting using the Reset button (fig. 3 11, page 4).
Setting the time
➤ Set the current time: see chapter “Setting the time” on page 26.
CAUTION! Beware of injury
Do not insert your fingers or objects into the air nozzles or the
intake grille.
To Next Page
Loading...
Need help?
General
