Dometic FreshWell3000 Technical description
17
6.4 Air conditioning modes
The under-bench air conditioner has the following air conditioning modes:
Air condition-
ing mode
Display
message
Explanation
Automatic In this mode the under-bench air conditioner sets
the temperature (set point) automatically and
manages the compressor, heat pump and fan
speed by comparing the set point with the room
temperature and it sets the corresponding condi-
tioning mode (see following table).
The , + and – buttons are deactivated in this
mode.
Cooling You specify the temperature and blower settings,
and the under-bench air conditioner cools the
interior to this temperature.
Heat Pump You specify the temperature and blower settings,
and the under-bench air conditioner heats the
interior to this temperature.
Circulating air You specify the blower level, and the under-
bench air conditioner blows air into the interior
.
Dehumidification You specify the temperature, and the under-
bench air conditioner cools the interior to this
temperature and controls the necessary blower
output and dehumidifys the interior (Circulating
air mode).
The button is deactivated in this mode.
Current room
temperature
20 °C 22 °C <
< 25 °C
25 °C
Set point: 20 °C 22 °C 25 °C
Conditioning
mode:
Heat Pump or
Circulating air
Dehumidification or
Circulating air
Cooling
To Next Page
Loading...
Need help?
General
