Dometic FreshWell3000 Operating the under-bench air conditioner
23
8.7 Setting the temperature
I
Cooling Mode
In the “Cooling” ( ), and “Dehumidifying” ( ) modes, you can specify a
temperature between 16 °C and 31 °C via the remote control.
➤ Use the + or – button to select the desired temperature.
✓ The under-bench air conditioner confirms the receipt of the values with a
high note.
✓ The temperature is set on the under-bench air conditioner.
Heat Pump Mode
In the “Heat Pump” ( ) mode, you can specify a temperature between 16 °C
and 31 °C via the remote control.
➤ Use the + or – button to select the desired temperature.
✓ The under-bench air conditioner confirms the receipt of the values with a
high note.
✓ The temperature is set on the under-bench air conditioner.
8.8 Setting the timer
The timer function allows you to set a specific time period for air conditioning.
You can specify the switch-on time, the switch-off time or both values. The
time can be set in 10 minute increments.
I
➤ Before programming the timer, select the air conditioning mode and all
required values (e.g. temperature).
NOTE
The under-bench air conditioner must be switched on.
NOTE
The remote control returns to its initial mode if no button is
pressed on the remote control for 15 seconds while programming
the timer.
To Next Page
Loading...
Need help?
General
