Dometic FreshWell3000 - Page 24

EN
Operating the under-bench air conditioner Dometic FreshWell3000
24
Setting the switch-on time
I
➤ Press the TIMER button once.
✓ The ON symbol ( ) flashes on the display of the remote control.
➤ Use the + or – button to set the time when the under-bench air conditioner
is to switch on.
➤ Press the SET – °F/°C button to transmit the value to the under-bench air
conditioner.
✓ The switch-on time is set on the under-bench air conditioner.
The under-bench air conditioner is switched on with the selected air
conditioning mode at the specified time.
➤ Switch the under-bench air conditioner to stand-by.
Setting the switch-off time
I
➤ Press the TIMER button twice.
✓ The OFF symbol ( ) flashes on the display of the remote control.
➤ Use the + or – button to set the time when the under-bench air conditioner
is to switch off.
➤ Press the SET – °F/°C button to transmit the value to the under-bench air
conditioner.
✓ The switch-off time is set on the under-bench air conditioner.
The under-bench air conditioner runs in the selected air conditioning
mode until the specified time.
NOTE
The under-bench air conditioner must be switched off.
NOTE
The under-bench air conditioner must be switched on.
08:00
20:00