Dometic GP-PWM-10-FM User Manual

[page 12] | gpelectric.com
7.5 RESETTING THE AMPERE HOURS CHARGED
To reset the count of ampere hours charged, toggle to the ampere hours
charged. Press and hold the A Button for 6 seconds to reset the counter
to zero.
7.6 ERRORS
OVER VOLTAGE
If the GP-PWM-10-FM experiences a battery over voltage (15.5V), the
controllerwillstopoperating,andthedisplaywillbegintoashwith
all icons. The controller will resume operating when the error is cleared.
Icons Displayed: All symbols
LOW VOLTAGE
If the battery voltage reaches 11 volts, the battery SOC symbol will show
the text “LOW” beneath it. The controller will continue operating in this
condition and will only stop operating if the voltage drops below 9 volts.
Icons Displayed: Battery SOC Symbol, LOW
OPERATING INSTRUCTIONS

Dometic GP-PWM-10-FM Specifications

General

Brand	Dometic
Model	GP-PWM-10-FM
Category	Controller
Language	English