6
General
Ammonia (a natural compound of hydrogen and
nitrogen) is used in the cooling unit as a coolant.
Non-ozone-hazardous cyclopentane is used as a
propellant for manufacturing PU foam insulation.
In order to ensure that the recyclable packaging
materials are re-used, they should be sent to the
customary local collection system. The appliance
should be transferred to a suitable waste dispo-
sal company that will ensure re-use of the recy-
clable components and proper disposal of the
rest. For eco-friendly draining of the coolant from
all absorber refrigeration units, a suitable dispo-
sal plant should be used.
Appliances bearing this symbol must be deposi-
ted at the designated local reception
point for the disposal of electrical and
electronic equipment.
It is not permitted that this product be
disposed of by way of the normal
household refuse collection system.
Dometic refrigerators bear this sym-
bol on the data plate to be found in the interior of
the unit.
1.9 Environmental notices
1.9.1 Disposal
1.8 Spare parts
Parts can be ordered throughout Europe from our
customer services.
Always give the model and product number when
you contact the customer service! You will find
this information on the rating plate inside the
miniBar.
Run the miniBar for about 12 hours before fil-
ling it.
Arrange the shelves evenly spread in the com
partment to achieve the most efficient use of
energy.
Where possible, always store precooled and
packed products.
Do not overfill the storage grids and compart
ments to prevent obstructing the internal air
circulation.
Maintain a clearance of approx. 5-10 mm bet
ween chilled products and post-evaporator
("cooling fins").
Only open the miniBar door for a short
period of time when removing products.
Set room temperature to approx. 20 °C (higher
room temperatures increase the energy con-
sumption of the miniBar).
Ventilate room regularly. Increased energy con-
sumption in rooms without air exchange.
Select "12°C" temperature setting (point 4.3).
Observe installation instructions (point 3.2).
Do not expose the miniBar to direct sunlight or
any other heat source (e.g. heater).
Ensure that air circulation of the refrigeration
unit is not obstructed.
1.9.2 Energy-saving tips
1.10 Declaration of conformity
To Next Page
Loading...
Need help?
General
