ITA-GB- D00 - 2020
COMBO DRIVE FOR UPC SERIES
23
21. AVVIAMENTO - STARTING
Videata di partenza / Starting view
Valore di partenza / Starting value
Per avviare l’unità, premere il tasto PRG. To start the unit press the PRG button.
Premere ENTER per cambiare la selezione Press the ENTER button to change the selection
Usare i tasti FRECCIA per cambiare il valore
impostato
Use UP and DOWN arrow to change the value
Premere ENTER per confermare la selezione
Il NUOVO valore appare a display
Press the ENTER button to confirm the selection
The NEW setting will be displayed.
Premere ESC per tornare al menù press the ESC button to previous menu