EasyManua.ls Logo

Dometic Qht - Summary Table of Programmable Functions

Dometic Qht
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Programmable Functions Q3 and Qht Controls for Direct Expansion Systems
14 L-2516 ENGLISH
SUMMARY TABLE OF PROGRAMMABLE FUNCTIONS
Table 4: Programmable Functions - Ranges and Factory Defaults
Function
Number Description Factory Default
Custom
Settings Function Range
1
Compressor Time Delay 0 0 - 70 seconds
2
Display Fahrenheit, Celsius, or
Auto
F F, C, or A (only with U-Board)
3
Compressor Differential 12 (12/8 = 1.5°F [0.8°C]) 2 - 31
4
Fan Response Differential 8 (8/8 = 1°F [0.6°C]) 2 - 31
5
Low Fan Speed 38 2 - 57
6
High Fan Speed 85 41 - 99
7
Fan Mode C (Continuous) C (Continuous)
I (Intermittent)
8
AC Line Voltage Calibration -- Plus or minus 1%
9
Temperature Calibration -- Plus or minus 1%
10
HU (Humidity) Pre-circulation 10 (minutes) 0 - 30 minutes
11
HU Dehumidification 30 (minutes) 10 - 60 minutes
12
HU Time Period 12 (hours) 2 - 16 hours
13
Software Revision (current version) n/a
14
Product Software dE = Direct Expansion
CH = Chilled Water or
Modulating Air Handler
n/a
15
Low-Pressure Switch Test OA = OK
FA = Fault
n/a
16
High-Pressure Switch Text OA = OK
FA = Fault
n/a
17
LCD or LED Segment Test Displays all LCD graphics or
LED segments
n/a
18
Sleep Mode
LCD backlight off or LEDs dim
On On = Continuous display
SL = Sleep Mode
19
Cool-Only Mode HP HP = Heatpump
CL = Cool Only
20
High-Pressure Delay 3 (minutes) 1 - 5 minutes
21
Anti-Icing Routine Adjustment 70 (°F) 65 - 80 °F
22
Fan-Speed Divisions 5 3 = 3 speeds
5 = 5 speeds
23 Aux Heat Enable/Disable “- -” “- -” = Aux Heat Disabled
“h1” = Aux Heat Enabled
(Reverse-cycle heat and aux heat
operate independently)
24 Seawater Low Limit Temp 40 (°F) 35 to 50 °F
25 Humidity Sensor Limit 60 (%RH) 50 - 80 %RH
26 Air Filter Timing Setting
(x100 hours)
0 0 = Disabled
1 - 25 (100 - 2500 hours)
27 Select FAMU (Fresh Air Make-
Up) Operation (future feature)
“- -” “- -” = Normal
FA = FAMU
28 CAN Bus Unit ID 59 0 - 99
29 CAN Bus Group ID 58 0 - 99
30 Custom Medium Fan Speeds 2 (only with U-Board) 2 or 5, or 2 or 3
31 Medium Low Fan Speed 50 (only with U-Board) 2 - 99
32 Medium Fan Speed 62 (only with U-Board) 2 - 99
33 Medium High Fan Speed 74 (only with U-Board) 2 - 99

Table of Contents

Related product manuals