C. When the front strip is in place, install one screw through the hinge and into the floor. The second
screw is installed with a washer on the opposite side.
Second: Install the two screws in the top frame.
A.The top decoration panel must be removed from the refrigerator before the screws can be
installed. Open refrigerator door and gently push the tabs out of the hole in the hinge with flat blade
screwdriver.
B. Carefully tilt the top decoration panel and lift up to remove from top frame.
C. Install the
second two screws in the top frame as shown.
17
To Next Page
Loading...
