Dometic VARC 72 - Page 33

31
Program/Factory
Initialization
Erase user settings and install global default value Yes/No
Clear all saved data Factory + User Yes/No
Insert New Passwords
User ####
Technician (PW1) ####
Factory (PW2) ####
I/O Configuration
See page 36
Factory
Configuration
I/O Configuration
Factory Settings
Initialization
Factory Settings
See page 32
Configuration
Temperature Units °F/°C
Pressure Units psi/bar
Force clock enable Yes/No
Clock mode 24h/12h
Disable Buzzer Yes/No
Startup delay # s
Enable Unit by
Digital Input On/Off
Supervisor On/Off
pLAN network On/Off
Schedule On/Off
Unit Control
Custom 1 On/Off
Custom 2 On/Off
Custom 3 On/Off
Custom 4 On/Off
Analog Input Filtering
Enable Yes/No
Input 1 # s
Input 2 # s
Input 3 # s
Input 4 # s
Input 5 # s
Manual Control Reset
Enable Yes/No
Time # m
PW/Return Delay ### s
Scheduler
Holidays No. #
Modbus Settings
1st Master
Baudrate #####
Stop bit 1/2
Parity Mode None/Even
/Odd
Evo Configurator
Devices rotation type Time/LIFO/
FIFO/Custom
Equalized Circuits power Equalized/
Packed/
Pac.if incr-eq if
DECR
Power+ n 1
EVO Configuration
See page 33
Power + n1
See page 34