Domino Ax350i User Manual

INSTALLATION
3-22 EPT019297 Issue 1 November 2016
(4) Place paper towel (or similar) on top of the level sensor modules to catch excess fluid. Use
the correct wash to remove any dried residual ink from the ink block valve face.
(5) Place paper towel (or similar) under the ITM manifold pipes and lubricate the pipes with
wash.
Washing the ink block valve face
Washing the ITM manifold pipes

Domino Ax350i Specifications

General

Print Technology	Continuous Inkjet (CIJ)
Printhead	i-Pulse Printhead
Ink Type	MEK, Acetone, Ethanol based inks
User Interface	Touchscreen
Connectivity	Ethernet, USB
Operating Temperature	5°C to 45°C
Resolution	300 dpi
Maximum Print Width	4.09 inches