Domino C1000 plus

C-Series plus
Printer
Operation and
Maintenance Manual

Domino C1000 plus Specifications

General

User Interface	Touchscreen
Supply Voltage	100 - 240 VAC
Frequency	50/60 Hz
Operating Temperature	5°C to 40°C
Print Speed	Up to 75 m/min
Connectivity	Ethernet, USB

Summary

SAFETY INFORMATION

SAFETY RECOMMENDATIONS

General guidelines for safe printer operation, installation, and maintenance.

Fire safety

Precautions regarding ink flammability and electrostatic discharge prevention.

INK Handling and Safety

Safe handling procedures for ink, including eye and skin contact precautions.

BASIC OPERATIONS

Base Unit Mounting Procedures

Instructions for mounting the base unit on a stand or conveyor.

Dual Mounting Bracket Installation

Information on using a bracket to mount two print heads side-by-side.

Control Unit Head Mounting

Procedures for mounting and dismounting the control unit head.

Control Unit Height Adjustment

Steps for adjusting the vertical position of the control unit.

Rotating Remote Head (C3000 XC1000 X)

Instructions for rotating the remote print head by 90 degrees for specific models.

Printing at Angles (C6000 i)

Procedure for setting up the print head to print at an angle for C6000i.

Print Head Setup (C6000 V)

Setup procedure for the C6000v print head for vertical printing.

Print Head Setup (C3000 XC1000 X)

Procedure for setting print angles for C3000X and C1000X models.

Releasing Air Flow Vent

Procedure for releasing air flow vents before initial printer operation.

REPLACING AN INK BOTTLE

200 ml Base Ink Bottle Replacement

Step-by-step guide for replacing the ink bottle in a 200ml base unit.

2 Litre Base Ink Bottle Replacement

Step-by-step guide for replacing the ink bottle in a 2 litre base unit.

INTERCONNECTIONS

Powering Up the Printer

Instructions on how to safely switch on the printer after connections are made.

PRIMING THE PRINT HEAD(S)

C6000 v Priming Procedure

Specific instructions for priming the C6000v print head.

Priming Rotated Head (C3000 XC1000 X)

Procedure for priming a rotated print head for specific models.

SETTING A PRINT JOB

PRINTING A DEFAULT TEST MESSAGE

PRINTING A SAVED MESSAGE

DELETING A SAVED MESSAGE

PROGRAMMING THE PRINTER

Erasing Control Unit Memory

Steps to reset the control unit to factory default settings.

FORMATTING MESSAGES

Creating a New Message

Steps for creating new text, barcode, or graphic messages.

Entering Text into Messages

Guide to typing text, managing lines, and selecting text sizes.

Saving a Message

Process for naming and saving a completed message.

Entering Sell By Date

Adding sell-by date information to messages in various formats.

Real Time Commands for Messages

Incorporating time, date, and shift codes into messages.

Counting Attribute for Messages

Adding incremental, decremental, or pallet counts to messages.

Bar Codes Generation

Creating and configuring various types of bar codes for messages.

Data Matrix Codes Creation

QR Codes Generation

Logos (Graphics) Insertion

ADJUSTING PARAMETERS

Message Parameter Adjustments

Speed Parameter Adjustment

DPI (Resolution) Adjustment

Delay Parameter Adjustment

Bar Code Magnification

Raster Remove for Bar Codes

MAINTENANCE

Routine Maintenance Schedule

Daily Maintenance Procedures

Daily cleaning tasks for the printer unit, including LCD and keypad.

Ink Collection Sponge Replacement

6-Month Maintenance Tasks

Comprehensive inspection and filter replacement every six months.

Nozzle Plate Cleaning

Procedures for cleaning the print head nozzle plate for optimal print quality.

C6000 V Head Cleaning

C1000 X & C3000 X PRINT HEAD POSITIONING

TROUBLESHOOTING

Printing Alignment and Quality Issues

Ink System Issues