OPERATION
EPT031055 Issue 2 September 2017 3-43
Add a New Script
Note: A script has to be copied to the scripts folder of the printer’s disk
to insert it into a message. This may be done via Home >
Settings > File Manager.
To add a new script to the message:
(1) Press on the screen within a specific area of the Message Editor
where you require the item to appear. A cross hair will appear at this
location.
(2) Select the Add icon.
(3) From the sub-menu select the Add Text icon.
(4) Select +Variable > +Create New > Script.
(5) Specify the source for the script and the parameters needed within
the script.
(6) Select the green tick icon to enter the offset clock into the message.
(7) Activate the message for printing by sending it to the printer via
the File menu .
To Next Page
Loading...
Need help?
General
