40 EPT058613 Issue 1 March 2020
GENERAL CLEANING
WARNING: The laser marking system and the connected installation must be
switched off with the mains supply to the laser marking system
disconnected.
The outer surfaces may be cleaned with a damp cloth and a mild cleaning agent only. No
humidity must get into the system.
SERVICE: REPLACEMENT OF COMPONENTS
Applications without Shutter
Applications with Shutter
Maximum cycles of E-Stop Relay PNOZ S4
(opening of guard door when laser is printing)
15 Million
Maximum cycles of E-Stop Relay PNOZ S4
(opening of guard door when laser is not printing)
100 Million
Maximum cycles of Shutter 10 Million
To Next Page
Loading...