EPT058613 Issue 1 March 2020 5
F-SERIES LASER CODER
WARNING: This is a Class 4 laser using high power invisible light. A risk of
personal injury or damage to equipment may result if proper safety
precautions are not observed. Reading and understanding this
manual is required before operating this laser system.
This manual has been produced for use in the operation of the Domino F-Series Laser
Coder and to reinforce and complement any training program available with the product. It
is not designed to replace any such training program.
All rights reserved. No part of this publication may be reproduced, stored on a retrieval
system, or transmitted in any form, or by any means, electronic, mechanical, photocopying,
recording or otherwise, without the prior permission of Domino Printing Sciences plc.
Domino Printing Sciences plc has a policy of continuous product improvement. The
Company, therefore, reserves the right to modify the specification contained in this manual
without notice.
For sales and service assistance please visit the following website and select “Contact
Domino in your country” for local technical support:
http://www.domino-printing.com
Domino Printing Sciences plc
Bar Hill
Cambridge
CB23 8TU
United Kingdom
Tel: +44 1954 782551
Fax: +44 1954 782874
© Domino Printing Sciences 2019
Notes: (1) The English version of the manual is the original version. All other languages
are translated from the English version.
(2) This manual’s intended use is for operators.
To Next Page
Loading...