EPT058613 Issue 1 March 2020 29
Creating and Editing a Message
Add Text
(1) Select Messages > New Message or Settings > Message Editor to open the
Message Editor.
(2) Press on the screen within a specific area of the Message Editor where you require
the item to appear. A cross hair will appear at this location.
(3) Select the Add icon.
The Add sub-menu displays:
(4) From the sub-menu select the Text icon.
Note: Change keyboards by selecting the appropriate Alternative Keyboard icon at the
bottom of the text entry screen.
(5) Enter the required text using the keyboard and select the green tick icon when
finished.
(6) To change text, select the text item and then the Keyboard icon on the Edit sub-
menu.
(7) To change text parameters (Object Name, Position, Bold, Width etc.), use the sub-
menu (Font, Alignment) or select More…
(8) To delete an object, select the object and select the delete icon of the Edit menu
(9) Activate the message for printing by sending it to the printer via the File menu
Add a New Barcode
To add a barcode to the message:
(1) Press on the screen within a specific area of the Message Editor where you require
the item to appear. A cross hair will appear at this location.
(2) Select the Add Barcode icon and select the type and specification required from
the list and editable text boxes.
(3) Use the Text, Variable, Edit Variable and Properties tabs to enter the barcode data.
(4) Select the green tick icon to insert the code into the message.
(5) Edit the barcode by highlighting the barcode within the message and using the sub-
menu or by selecting More…
(6) Activate the message for printing by sending it to the printer via the File menu
Text
Barcode
(MRC)
Image
Arc
Rectangle
Clone
Item
To Next Page
Loading...