22 EPT058613 Issue 1 March 2020
F-SERIES CONNECTIVITY
The F-Series is operated either via a remote TouchPanel or via a PC running on Microsoft
Windows 7® or Windows 8® with installed QuickStep software.
To connect to one F-Series, the TouchPanel is connected to the X59 TouchPanel connector
of the controller.
The TouchPanel then displays the UI relating to that printer.
One TouchPanel can control multiple F-Series in the same network if required.
Details about the printer being controlled are displayed in the Home screen which lists: the
logged in user, the printer’s name and the printer model. To connect to another printer in
the network, follow the steps below:
(1) Disconnect from the current printer by pressing the Lock button and selecting
Disconnect From Printer to display the printers’ list screen.
(2) Press the Lock button and select Unlock UI Settings, enter the password (QS).
(3) Press Settings, select Broadcast (default) as the connection method.
(4) Go back to the printers’ list screen and press Refresh to view a list of all printers in
the network.
(5) Select the required printer.
A list of favourite remote printers can be created, as follows:
(1) From the printer’s list screen, press the Lock button and select Unlock UI Settings,
enter the password (QS).
(2) Press Settings and select Favourite as the connection method.
(3) Press Add Favourite and fill in the required fields manually or get a favourite printer
from broadcast
(4) Select a printer from the Broadcast list.
(5) Press Add to Favourites.
To Next Page
Loading...