34 EPT058613 Issue 1 March 2020
Add a New Link
To add a new link to the message:
(1) Press on the screen within a specific area of the Message Editor where you require
the item to appear. A cross hair will appear at this location.
(2) Select the Add icon.
(3) From the sub-menu select the Add Text icon.
(4) Select +Variable > +Create New > Link.
(5) Enter a name or use the default name for the link object.
(6) Specify the source of the link, e.g. a counter or a clock or message content element.
System variables are entered into a message via a link.
(7) Select the green tick icon to enter the offset clock into the message. The link object
will have the same content as the source object.
(8) Activate the message for printing by sending it to the printer via the File menu .
Undo / Redo
Undo re redo the last editing steps in the message editor including change of settings or
parameter settings.
Note: Creating a new message clears the undo cache - no undo to the last message is
possible.
To Next Page
Loading...