17
ENGLISH
VM 430 METER
AUTO POWER ON/OFF:
The monitor will be turned on automatically by pressing any key or
start to exercise. It will turn off automatically if the monitor cannot
detect any signal for 256 seconds.
"TIME":
If the time is not preset, it will count in one-second intervals for the
exercising. The distance you have traveled will be displayed on the
meter.
• Counting: Without setting the time value, the monitor will count the
time from 00:00~99:59.
• Count down: Setting the exercise time from 1:00~99:00 minutes,
the monitor will count down from your setting values. Once the set-
ting value is reached, the monitor will set off an alarm.
"SPEED":
The meter displays the current speed when exercising
The monitor will display the current speed from 0.00 ~ 99.9 Km/h or
Mile/h.
DIST
ANCE:
The monitor will add the distances traveled.
• Counting: Without setting the distance value, the monitor will count
up the distance from 0.1~999.9Km or Miles.
• Count down: Setting the exercise distance from 1.0~999.0 Km or
Mile, the monitor will count down from your setting values. Once the
setting value reached, the monitor will set off an alarm.
HEAR
T-RATE:
Before measuring your heart rate, place the palms of your hands on
the two contact pads, then the current heart rate on the meter will
appear on the window. If no Pulse Signal input is found within 16
seconds, the display will indicate “P_”.
Warning: it is an estimation and should in no case be interpreted
as a medical fact.
CALORIES :
The calories burned will be displayed on the window.
• Counting: Without setting the distance value, the monitor will count
up the distance from 0.1~999.0.
• Count down: Setting the exercise calorie from 1.0~999.0, the moni-
tor will count down from your setting values. Once the setting value
reached the monitor will set off an alarm.
Warning: it is an estimation and should in no case be interpreted
as a medical fact.
KEY GUIDE
FUNCTIONS AND OPERATIONS
MODE:
Select the function to be preset.
"UP":
Press the UP key to increase the setting values of TIME, DISTANCE,
CALORIES or PULSE.
"DOWN":
Press the DOWN key to decrease the setting values of TIME, DISTAN-
CE, CALORIES or PULSE.
"RESET":
Resets all displays to zero.
MODE
RESET
DOWN
UP
To Next Page
Loading...
Need help?
General
