DONPER USA—USER MANUAL
14 — COPYRIGHT DONPER USA 2015
To operate the machine in any mode, the main power switch must
first be turned to the “ON” posion.
The machine has 3 operang modes:
1) Wash Mode: This is when the refrigeraon system is turned off and
the mixing motors are running. You use this mode to circulate
cleaning or sanizing soluon through the machine hopper and bar‐
rels.
2) Auto Mode: This is the normal operang mode of the machine
where the refrigeraon system and the mixing motors are on so
that the machine is freezing and preparing so serve product to
serve.
3) Standby Mode: This is where the machine is configured to keep the
product in the barrels refrigerated for extended periods of me
(during slow sales periods or even overnight).
OPERATING IN THE WASH MODE:
Press the “Wash” buon and the “Wash ” indicator light will turn on.
Both the right and le mixing motors will turn on simultaneously. To
stop, simply press the “Wash” buon again. During the Wash Mode,
the refrigeraon system for the freezing cylinders will be OFF. Wash
Mode only rotates both beaters inside of the freezing cylinders with‐
out any freezing. Wash Mode is used to drain mix from the machine or
rinse the beater assemblies with water or sanizing soluon.
To Next Page
Loading...
