connecting the input end of the charger to the, or else the charger will not be launched
into charging state; the charge has precharge function. When the pressure of the battery
is lower than 4.45V and higher than 35V, it will enter into precharge state. When the
batter pressure is higher than 46.4V, it will enter into normal charging state.
DC-DC Transverter
DC-DC converter converts the battery pressure into 12V pressure to finish the
electrical device power supply of 12V working pressure which the vehicle needs, such
as instruments, lights and horns. The converter 12V output is controlled by enable line
(electrical door lock), so as to avoid the electrical door lock to sustain instant large
current impact.
Brake and kick stand outage switch:
The braking part of the electrombile, used simultaneously with the brake handle.
It performs the function of braking to stop the electrical machine from operating. The
stoplight is synchronously lit up (under the circumstance that the vehicle is powered on.
VCU：
To Next Page
Loading...
