VCU is the vehicle's central control system. It is used as the part of the vehicle
for receiving and sending data. SIM card, GPS orientation module and gyroscope is set
within it. For example, when a vehicle's location changes, check the location via GPS
module, send the location to the server via SIM card's network, after processing by the
server, the location will be updated to the map on the interface of the APP, at this time,
the location of the vehicle can be read by people And the data and status of the vehicle
are also updated to the APP in this manner. After detecting any abnormalities (such as
turning on one side and toppling over) in the vehicle, the gyroscope will remind the
user in the manner of pushing a message. This part contains a built-in battery. When the
built-in battery is fully charged, under the circumstance that the vehicle's battery is
disconnected with the charger, the built-in battery can still hold for more than 20 hours.
Rolling handle:
Speed control components of electrombile. After the vehicle is normally powered
on, rotate the rolling handle's opening degree to control the rotation and speed of the
electrical machine. While using the regulating rolling handle, rotate and put down
gently, there is no need to use great force.
To Next Page
Loading...
