7.1. Adjusting the rotation angle
of the handle
• Press the handle rotation buttons (#5) on
both sides simultaneously and begin rotating
the handle (#2) toward the desired position,
A, B, or C. Release the handle rotation
buttons (#5) and rotate the handle (#2) until
it is engaged in the desired position. You
should hear a “click” sound when the handle
is locked.
You can engage the handle (#2) in three different positions: A, B, or C.
•
NEVER place or hang accessories which are
not intended for use with the Doona Car Seat.
•
Remove all bags and accessories from the
Doona Car Seat before transitioning between
modes.
2
1
1
C
B
USE MODES
Important! The handle cannot be rotated
when extended. To retract handle, see section
7.3 Extending and retracting handle.
A
To Next Page
Loading...
