THE NEXT GENERATION CAR SEAT
From carrier mode to stroller mode
STEP 1. Press the handle rotation buttons (#5) on both sides
simultaneously, and rotate the handle (#2) to its upright position B.
STEP 2. Push in the red safety lock (#18) of the stroller wheel release
(#17) at the back of the Doona Car Seat, and squeeze it up, to unfold
the wheels. You should hear a “click” sound when the legs are fully
opened and locked.
STEP 4. Press the handle rotation buttons (#5) on both sides simultaneously,
and rotate the handle into position C (toward the child’s feet).
STEP 3. MAKE SURE the legs have locked into place.
22
11
22
11
11
11
11
22
click
To Next Page
Loading...
