THE NEXT GENERATION CAR SEAT
Prevent risk of ejection in a crash.
• Make sure that the shoulder straps are not
twisted and are threaded through the shoulder
strap slots at the same height.
• The shoulder straps and metal harness plate
MUST rest between the metal bar and the seat
body.
• Make sure that the shoulder straps (#8) are
properly secured. They should be fully inserted
into the slots in the metal harness plate.
8.4. Buckle use
To unbuckle the harness, press the buckle
release button (#10) and pull both buckle
tongues (#9) from the buckle.
To buckle the harness, insert one buckle
tongue (#9) at a time into the buckle until a
“click” sound is heard.
IMPORTANT! Both buckle tongues must be
fully inserted and locked in the buckle for the
harness to be buckled properly
IMPORTANT! Pull on the buckle to ensure it is
properly locked.
To Next Page
Loading...
