THE NEXT GENERATION CAR SEAT
12.3. Lap Belt Installation.
• The handle must be in position C (Car Seat
Mode), for correct installation in the car.
• Doona recommends securing your seat with a
Lap Shoulder Belt European Installation whenever
possible.
• The Doona Car Seat must be
properly reclined. The seat is
properly reclined when the red
level line on the side sticker is
parallel to the ground when
installed without the Doona Base.
STEP 1: Place the Doona Car Seat rear-facing on the vehicle seat (child is
facing backwards).
STEP 2: Place the handle (#2) in car seat mode, position C.
To Next Page
Loading...
Need help?
General
