THE NEXT GENERATION CAR SEAT
Ensure correct installation
• Make sure that the Doona Car Seat position C.
• When installed without a base, adjust the Doona
Car Seat position and angle according to the
red level line that appears on the side sticker.
The red line should be parallel to the ground.
• In lap-shoulder belt installation DO NOT route the
shoulder portion of the vehicle belt through the lap
belt guides.
If you cannot achieve a secure installation, try a
different vehicle seating position or installing with the
Doona Base. If you have any questions about the
installation, contact your local distributor.
To Next Page
Loading...
