THE NEXT GENERATION CAR SEAT
Correct installation
•
Make sure the harness straps are not twisted
and are correctly routed through the shoulder
strap slots.
•
Make sure that the shoulder straps are correctly
reconnected to the metal harness plate.
•
Make sure that the harness metal plate (#21)
and shoulder straps (#8) are routed between
the metal bar (#22) and the car seat body. No
part should go infront of the metal bar (#22).
STEP 3: Reconnect the 3 sunshade pins (#32) at the back of the
sunshade (#4).
To Next Page
Loading...
