Caution :
Align the bolt holes with gasket holes to
prevent damage to the gasket and
tighten.
9.3.23. Oil filter
•
Install the oil filter onto the cylinder block,
and tighten the fixing bolts.
•
Install packing and assemble the
cartridge using a filter wrench.
9.3.24. Oil cooler
•
Coat a grease at the oil hole of the oil
cooler housing and insert the O-ring.
•
Assemble the oil cooler assembly by
tightening the assembling nuts.
•
Connect the cooling water pipe with the
cooling water pump and tighten a hose
clamp.
9.3.25. Starter
•
Assemble the starter in position on the
flywheel housing.
9.3.26. Intake and exhaust valves
•
Identify the marks of “IN” and “EX”
impressed on the valve head before
assembling the valve with the valve
head.
- 112 -
To Next Page
Loading...
