- 127 -
LP Engine G430(3.0L) Base Engine Service Procedure
Valve Train Components Inspect
(Cylinder Head)
Inspect the following areas:
• The valve rocker arms and ball at the mating surfaces.
These surfaces should be smooth and free of scoring
or other damage.
• The valve pushrod sockets and valve stem mating
surfaces. These surfaces should be smooth with to
scoring or exceptional wear.
• The valve pushrods for bends or scored ends.
Valve Lifter Removal
Tools Required
• J 3049 Valve Lifter Remover (Plier Type)
• J 9290-01 Valve Lifter Remover (Slide Hammer
Type)
1. Use the J 3049 in order to remove the valve lifters.
2. If the valve lifters cannot be removed with the J
3049 use the J 9290-01 in order to remove the
valve lifters.
VE026-3L
VE025-3L
VE024-3L
To Next Page
Loading...
Need help?
General
