- 181 -
ITK-1 Pressure Gauge Kit
The IMPCO ITK-1 pressure gauge kit is designed
for testing and troubleshooting IMPCO gaseous
fuel systems. The kit contains the following:
● 0-160 psi gauge - For measuring fuel container
pressure or on dual fuel systems it may be used
to measure gasoline fuel system pressure.
● 0-5 psi gauge - For measuring IMPCO pressure
regulator, primary pressure.
● 0-10” H2O gauge - For measuring IMPCO
pressure regulator, secondary pressure.
● G2-2 lever gauge - For correct adjustment of the
IMPCO pressure regulator, secondary lever.
● Assorted fittings
● Hose
● Instructions
FSA-1000 Fuel System Analyzer
(Low Emission Version Only)
See instructions for proper usage to check air/fuel
mixture.
LP Engine G430(3.0L) Special Toos & Equipment