Installation instruction
DORMA
AGILE 150 DORMOTION
Installation to wall
Montageanleitung
DORMA
AGILE 150 DORMOTION
Wandmontage
Stand/Issue 02.10 / 004599 800.52.639.6.32
DORMA-Glas
Inhaltsverzeichnis:
Index of contents:
S. 2-3. . . . . . . . . . . Wichtige Informationen / Important information
S. 3 . . . . . . . . . . . Benötigte Werkzeuge / requisite tools
S. 4 . . . . . . . . . . . Glasbearbeitung DORMOTION L / glass preparation DORMOTION L
S. 4 . . . . . . . . . . . Lieferumfang DORMOTION L / scope of delivery DORMOTION L
S. 5 . . . . . . . . . . . Glasbearbeitung DORMOTION XL / glass preparation DORMOTION XL
S. 5 . . . . . . . . . . . Lieferumfang DORMOTION XL / scope of delivery DORMOTION XL
S. 6 . . . . . . . . . . . Position der Laufschiene vor der Maueröffnung /
position of track rail ahead the wall opening
S. 7 . . . . . . . . . . . 1. Montage des Winkelprofils / installation of the angle profile
S. 8 . . . . . . . . . . . 2. Montage der Bodenführung / installation of the floor guide
S. 9 . . . . . . . . . . . 3. Montage der Klemmwagen / installation of the clamping carrier
S. 10 . . . . . . . . . . . 4.
Vorbereitung Aushebeschutz / preparation of anti-jump device
S. 10 . . . . . . . . . . . 5. Endmontage der Bodenführung / final installation of floor guide
S. 11 . . . . . . . . . . . 6. Montage der Dämpfereinheit / installation of the spring damper unit
S. 12/13 . . . . . . . . . 7. Montage der Schiebetür und Befestigung der Laufschiene
7. Fitting of sliding door and fixing of the track profile
S. 14 . . . . . . . . . . . 8. Höheneinstellung / height adjustment
S. 14 . . . . . . . . . . . 9. Einstellung des Aushebeschutzes / adjustment of the anti-jump device
S.15/16 . . . . . . . . . 10. Positionierung der Laufwegbegrenzer / positioning of panel stops
S. 17 . . . . . . . . . . . 11. Positionierung der DORMOTION Start / positioning of DORMOTION start
S. 18 . . . . . . . . . . . 12. Glaskantenschutz / glass edge protection
S. 19 . . . . . . . . . . . 13. Montage der Sichtschutzbürste (optional) / installation of brush profile (optional)
S. 20 . . . . . . . . . . . 14. Montage der Stirnabdeckungen / installation of end caps