DOUGH Spectrum ES07D03 User Manual

Setting up Spectrum
18
CONNECTING USB DEVICES
Spectrum has a built-in USB hub that allows you to connect multiple devices with a single cable.
The rear of the monitor provides one USB Type-C and one USB Type-B upstream port. Either
can be used to connect the built-in USB hub to a host device. You can select which of the
connected host devices controls the USB hub from the on-screen display (OSD) menu.
The rear of the monitor provides one USB Type-C and two USB Type-A downstream ports. You
can use these to connect devices such as a mouse, keyboard, phone, external hard drive, and
practically anything that is USB-connected and can accept 5V.
IMPORTANT: Do not switch between USB upstream ports while a storage
device connected to the downstream ports is in use, as this may cause data
loss. For the same reason, it is not recommended to enable automatic USB
hub host switching in the OSD menu if storage devices are attached to
Spectrum’s downstream ports.

DOUGH Spectrum ES07D03 Specifications

General

Brand	DOUGH
Model	Spectrum ES07D03
Category	Monitor
Language	English