GAMING MENU
CROSSHAIR
Enables or disables a targeting reticule overlay. While the crosshair is active and the OSD menu
is closed, pressing up or down on the joystick will adjust the position of the crosshair on the
screen.
FRAME RATE COUNTER
Enables or disables a live display of the current input frame rate. While the frame rate counter is
active and the OSD menu is closed, pressing up or down on the joystick will adjust the position of
the counter on the screen.
NOTE: At low frame rates, the graphics card may use a technique called low
framerate compensation (LFC), duplicating frames to match the minimum
refresh rate of Spectrum.
As Spectrum cannot differentiate between new frames and their duplicates
the frame rate counter will in this case show the total number of frames
generated by the graphics card (48). This may differ from the number of
unique frames as displayed by some software-based frame rate counters.
CROSSHAIR STYLE
Selects the style of the crosshair.
'Dot' style
'Cross' style
'Eve' style
CROSSHAIR COLOR
Selects the color of the crosshair.
PRESETS MENU
LOAD FACTORY DEFAULTS
Overwrites all monitor settings with those stored in the factory setting profile for the monitor,
restoring default values. This does not overwrite the user presets.
LOAD USER PRESET (1/2/3)
Overwrites all monitor settings with those stored in the selected user-generated setting profile
for the monitor. This does not overwrite any user presets.
SAVE PRESET
Overwrites all monitor settings in the selected setting profile with the current values. This does
not overwrite any other user presets.
To Next Page
Loading...
Need help?
General
