2. To access the OSD menu, depress the joystick to open the OSD.
3. Use the joystick to navigate, select, and adjust the menu choices.
• Pressing up or down will change the current selection or adjust the current setting.
• Pressing right will confirm the currently highlighted choice and proceed to the next
submenu.
• Pressing left will return to the previous menu level.
• Depressing the stick will return to the main menu, or if already on the main menu, will
close the OSD entirely.
NOTE: If no control inputs are given for a prolonged period, the OSD menu
will close automatically. You can adjust the length of this time-out in the
‘OSD’ submenu.
NOTE: Most settings will automatically be stored as you cycle through the
available options. Some settings do require you to confirm your selection by
pressing right once more, before returning to the previous menu level or
closing the OSD menu. These are generally settings that could cause
compatibility issues or jarring changes in the display.
To Next Page
Loading...
Need help?
General
