25
Manual (LOCAL) Operation
5.2.2 Error Operations
View the contents of the Error Log (see Section 6.5.1). Each entry is
displayed with the oldest being first (First In First Out), showing the Error
Record Number (its place in the Error Log), an associated Error Code, an
associated Error Data, and a text explanation of the Error.
The Error Data contains various parameters associated with certain
Errors. For instance, an Error Code 10 “Switch Did Not Respond” will
show the offending switch ID in the Error Data field.
Once a particular Error has been logged, no further occurrences of it will
be entered. For instance multiple subsequent misspelled Commands,
would not result in multiple Syntax Errors being logged until the original
entry was cleared.
As each error is being read (displayed locally or queried remotely) it will
also be removed, always clearing the oldest remaining entry, from the
Error Log. Entries in the Error Buffer are removed by successive presses
of the up or down arrow keys.
The Error LED will illuminate green when the Error Log is empty unless a
persistent error condition exists, such as a Power Supply failure that
remains failed.
To Next Page
Loading...
Need help?
General