47
3-6-15-1 Switch on delay 0
240
c c Debounce time to avoid switching On the pump,
when actual value is less then setpoint minus
bandwidth
3-6-15-2 Switch off delay 0
240
c c Debounce time to avoid switching Off the pump,
when actual value is more then setpoint plus
bandwidth
3-7 Time/Date e n Date and time
3-7-1 Date e c Setting the date
3-7-1.1.1 #0-0 Year 1970
2007
2099
e c Setting the actual Year
3-7-1.1.2 #0-1 Month 1
12
e c Setting the actual Month
3-7-1.1.3 #0-2 Day 1
31
e c Setting the actual Day
3-7-2 Time e c Setting the time
3-7-2.1.1 #0-0 Time 0
86399
e c Setting the time HH:MM:SS
3-7-3 Check run mode OFF
Digital Input
Interval based
Time of day based
Time of week based
e c Select how and when a checkrun should be per-
formed. (check run only on pumps which did not
run)
3-7-4 Check run interval 30
86400
100000
e s The interval between the check runs Applicable
for pumps not operation for 24h.
3-7-5 Check run at e c Setting the clock when a check run is required.
Applicable for pumps not operation for 24h.
3-7-5.1.1 #0-0 Hours 0
23
e c Setting the hours of the check run clock
3-7-5.1.2 #0-1 Minutes 0
59
e c Setting the minutes of the check run clock
3-7-6 Check run at e c Setting the date and clock when a check run is
required. Applicable for pumps not operation for
24h.
3-7-6.1.1 #0-0 Hours 0
23
e c Setting the hours of the check run clock
3-7-6.1.2 #0-1 Minutes 0
59
e c Setting the minutes of the check run clock
3-7-6.1.3 #0-2 Day Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
e c Setting the day of the check run clock
3-7-7 Check run duration 0
30
e s The check-run time per pump. (one at the time
and alternating)
3-7-8 Clock adapt setp. e n Alternative setpoint which will be active on clock
settings
Parameter
Display
text
Value
1
description
Min./Max.
Read
Write
Help text
To Next Page
Need help?
General