DQ Technologies, Inc., phone: 512.248.8324 - www.dqtech.com
13
Installation of Dashcam Bracket
• Park the vehicle on flat sruface, clean the interior and exterior of the glass in the Installation
area with alcohol wipe to ensure there is no dirt on the glass and ensure the glass is dry.
• Tear off the 3M adhesive tape, install the bracket horizontally on the target installation area
of the front windshield (the upper edge of the bracket should be parallel to the upper edge of
the windshield) according to the direction indicated by the arrow on the bracket, and press
the bracket for 10s to ensure that no air bubbles remain between the bracket and the glass.
• Note: When installing the bracket, install the bracket according to the direction indicated on
the bracket, so that the toothed side faces to the right.
To Next Page
Loading...