DQ Technologies, Inc., phone: 512.248.8324 - www.dqtech.com
3
Introduction
1. Before installation, please park the vehicle on a flat surface and turn off the engine (do not park the
vehicle on a ramp or an inclined road).
2. Review the packing list section of this document and check carefully while unpacking.
3. Read the tool list section of this document before product installation.
4. Before installation, please observe the vehicle environment and follow the recommendations below:
• The installation position and cabling of the camera should not affect the driver's view or affect
the adjustment of the rearview mirror and sun visor.
• The lens for monitoring the road condition ahead of the vehicle must be within the working
range of the windshield wiper.
• The installation position should comply with any local regulations.
• The installation location should be convenient for access to Micro SD card and SIM card.
5. The appropriate installation position shall be selected according to the vehicle environment, and this
document is for reference only.
6. The appropriate power supply connection method should be selected according to the vehicle
environment. When using the hard/loose wire connectors, connection to the power supply is
required, and should be carried out by specialized personnel. This document is for reference only.
7. In case of any problem in the installation for special vehicles, please contact DQ Technologies at:
512-248-8324 option 3 or email support@dqtech.com for support.
To Next Page
Loading...