DQ Technologies, Inc., phone: 512.248.8324 - www.dqtech.com
14
Installation of Dashcam
• Connect the Dashcam to the bracket with the front side facing inward (with the teeth on the right
side of the bracket engaged with those on the right inner side of the Dashcam) and tighten the
bracket clockwise with a PH2 cross screwdriver (before tightening, first adjust the Dashcam to be
vertical).
Angle Adjustment and Fixation of Dashcam
• Adjust the Dashcam back and forth so that it is vertical.
• Fasten the bracket stud to ensure that the angle of the Dashcam will not be changed easily and fix
the Dashcam.
• When fixing, ensure that the cab camera screen meets the following conditions:
To Next Page
Loading...